|
|
| Inmate had shed some required restraints |
| By The Honolulu Advertiser |
| Published: 04/14/2006 |
|
Prison internal affairs investigators are trying to determine why an inmate who was shot and killed during an escape attempt in downtown Hilo apparently was not wearing all of the restraints required during prisoner transports, including a waist chain, leg shackles and handcuffs. Frank Lopez, acting director of the state Department of Public Safety, said he has not confirmed reports that a restraint key was found in the street next to the prison van after inmate Thane K. Leialoha was shot Tuesday on Haili Street near a busy intersection. "If he had a key, that would be troubling as to how he got it," Lopez said. Corrections staff reported that Leialoha, 28, was wearing restraints as required by department procedure when he left Hilo District Court to return to the Hawai'i Community Correctional Center just before the escape attempt, Lopez said. Inmates are supposed to be transported in vans that lock from the outside, and prison officials will try to determine how Leialoha left the van at the intersection of Haili and Kilauea Avenue at about 2:07 p.m. Tuesday. Sabrina Kauai, Leialoha's girlfriend, said a witness told her Leialoha shoved the corrections officer to the ground before fleeing down Haili Street in a brown prison jumpsuit. Kauai said the witness reported that the officer fired from a sitting position and struck Leialoha in the back of the head. Lopez said he has heard conflicting accounts of how Leialoha was restrained. Some witnesses said he wore no restraints when he escaped from the van, while at least one witness said Leialoha was handcuffed. |
Comments:
Login to let us know what you think
MARKETPLACE search vendors | advanced search
IN CASE YOU MISSED IT
|
They should start looking for pole building contractors near me as soon as possible. These things should not be delayed as it is a matter of health and safety of everyone involved.
About one-third of our lives are spent at work. With that time invested, it’s reasonable to assume that an employer would want to keep you safe. With a workplace injury attorney you can get the legal advice that you need to get on with your life. If your employer does not have workers' compensation insurance and your employer is at fault for your accident, then you can sue your employer directly with the help of a workplace injury attorney.
How have your spirits been while under quarantine for COVID-19? We are hopefully halfway through this pandemic’s impact on our economy. It has been a difficult road for us all. It has taught us about our better-and worse-natures. Hamilton Philip Lindley explains how it has impacted his family and work life balance in this latest blog article about how to invest time that we’ve been given to make ourselves better than when we began.
Pitot all kinds of sensor is used to measure the speed of the airplane. It is a differential Pressure Sensor . It measures the difference between a static port (not in the air stream) and a Pitot tube which is directly placed in the path of Nagano keiki Pressure sensor air flow.When the plane is stationary, the pressure in both the tubes is equal and abs speed sensor the air speed is zero. When the plane is moving, air enters the pitot mazda 6 suction control valve . This causes the pressure difference between the suction control valve and the pitot tube. An internal amplifier creates an amplified voltage output and hence the sensor can be connected directly to Speed Sensor and data acquisition systems. The output voltage changes with the difference in pressure between the two ports.VW & AUDI SERIES PEUGEOT & CITROEN SERIES RENAULT SERIES VOLVO SERIES